D.S. Hodgson
2004-04-09 12:15:24 UTC
Hi,
I have HH working happily to connect to Demon at 64k (through an IPCop
linux based firewall box using isdn4linux) but 128k doesn't work. The
line disconnects after a few seconds.
I don't have BoD enabled, just straight dual channel connect.
The log entries I get are:
10:20:46 ipppd[10032] Found 2 devices: ,
10:20:46 ipppd[10033] ipppd i2.2.12 (isdn4linux version of pppd by MH)
started
10:20:46 ipppd[10033] init_unit: 0
10:20:46 ipppd[10033]: Connect[0] /dev/ippp0, fd: 8
10:20:46 ipppd[10033] init_unit: 1
10:20:46 ipppd[10033]: Connect[1] /dev/ippp1, fd: 9
10:20:47 kernel: ippp0 dialing 1 08452120665...
10:20:47 kernel: ippp1 dialing 1 08452120665...
10:20:48 kernel: isdn_net ippp1 connected
10:20:48 ipppd[10033] Local number: , Remote number: 08452120665,
Type: outgoing
10:20:48 ipppd[10033] PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 1,
linkunit: 1, fd: 9
10:20:48 kernel: isdn_net ippp0 connected
10:20:48 ipppd[10033] Local number: 0207xxxxxxx, Remote number:
08452120665, Type: outgoing
10:20:48 ipppd[10033] PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0,
linkunit: 0, fd: 8
10:20:48 ipppd[10033] ioctl(SIOCSIFMTU): No such device, 7 ippp1 1514.
10:20:48 ipppd[10033] Remote message:
10:20:48 ipppd[10033] MPPP negotiation, He: Yes We: Yes
10:20:48 ipppd[10033] CCP enabled! Trying CCP.
10:20:48 ipppd[10033] CCP: got ccp-unit 0 for link 1 (Compression
Control Protocol)
10:20:48 ipppd[10033] ccp_resetci!
10:20:48 ipppd[10033] Compressor Stac Electronics LZS loaded!
10:20:48 ipppd[10033] ccp_resetci!
10:20:48 ipppd[10033] Compressor Stac Electronics LZS loaded!
10:20:48 ipppd[10033] [1] LZS (hists 1 check 3) compression enabled
10:20:51 ipppd[10033] ioctl(SIOCSIFMTU): Invalid argument, 7 ippp0
1514.
10:20:51 ipppd[10033] Remote message:
10:20:51 ipppd[10033] MPPP negotiation, He: Yes We: Yes
10:20:51 ipppd[10033]: ipppd[0] discr: 2
10:20:51 ipppd[10033]: ipppd[0] passed 1
10:20:51 ipppd[10033]: ipppd[0] passed 2
10:20:51 ipppd[10033]: ipppd[0] pap/chap-check passed
10:20:51 ipppd[10033] ok, found a valid bundle with linkunit 1
10:20:51 ipppd[10033] bundle: 0
10:20:51 ipppd[10033] local IP address 158.152.xxx.xxx
10:20:51 ipppd[10033] remote IP address 158.152.1.222
10:20:51 ipppd[10033] ioctl(SIOCAIFADDR): No such device
10:20:52 ipppd[10033] Modem hangup
10:20:52 ipppd[10033] Connection terminated.
10:20:52 ipppd[10033] taking down PHASE_DEAD link 1, linkunit: 1
10:20:52 ipppd[10033] closing fd 9 from unit 1
10:20:52 ipppd[10033] link 1 closed , linkunit: 1
10:20:52 ipppd[10033] reinit_unit: 1
10:20:52 ipppd[10033]: Connect[1] /dev/ippp1, fd: 9
10:20:52 kernel: ippp1 remote hangup
10:20:52 kernel: ippp1 Chargesum is 0
Anyone give me some advice abouth what parameters in I4L to change?
Thanks
David
I have HH working happily to connect to Demon at 64k (through an IPCop
linux based firewall box using isdn4linux) but 128k doesn't work. The
line disconnects after a few seconds.
I don't have BoD enabled, just straight dual channel connect.
The log entries I get are:
10:20:46 ipppd[10032] Found 2 devices: ,
10:20:46 ipppd[10033] ipppd i2.2.12 (isdn4linux version of pppd by MH)
started
10:20:46 ipppd[10033] init_unit: 0
10:20:46 ipppd[10033]: Connect[0] /dev/ippp0, fd: 8
10:20:46 ipppd[10033] init_unit: 1
10:20:46 ipppd[10033]: Connect[1] /dev/ippp1, fd: 9
10:20:47 kernel: ippp0 dialing 1 08452120665...
10:20:47 kernel: ippp1 dialing 1 08452120665...
10:20:48 kernel: isdn_net ippp1 connected
10:20:48 ipppd[10033] Local number: , Remote number: 08452120665,
Type: outgoing
10:20:48 ipppd[10033] PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 1,
linkunit: 1, fd: 9
10:20:48 kernel: isdn_net ippp0 connected
10:20:48 ipppd[10033] Local number: 0207xxxxxxx, Remote number:
08452120665, Type: outgoing
10:20:48 ipppd[10033] PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0,
linkunit: 0, fd: 8
10:20:48 ipppd[10033] ioctl(SIOCSIFMTU): No such device, 7 ippp1 1514.
10:20:48 ipppd[10033] Remote message:
10:20:48 ipppd[10033] MPPP negotiation, He: Yes We: Yes
10:20:48 ipppd[10033] CCP enabled! Trying CCP.
10:20:48 ipppd[10033] CCP: got ccp-unit 0 for link 1 (Compression
Control Protocol)
10:20:48 ipppd[10033] ccp_resetci!
10:20:48 ipppd[10033] Compressor Stac Electronics LZS loaded!
10:20:48 ipppd[10033] ccp_resetci!
10:20:48 ipppd[10033] Compressor Stac Electronics LZS loaded!
10:20:48 ipppd[10033] [1] LZS (hists 1 check 3) compression enabled
10:20:51 ipppd[10033] ioctl(SIOCSIFMTU): Invalid argument, 7 ippp0
1514.
10:20:51 ipppd[10033] Remote message:
10:20:51 ipppd[10033] MPPP negotiation, He: Yes We: Yes
10:20:51 ipppd[10033]: ipppd[0] discr: 2
10:20:51 ipppd[10033]: ipppd[0] passed 1
10:20:51 ipppd[10033]: ipppd[0] passed 2
10:20:51 ipppd[10033]: ipppd[0] pap/chap-check passed
10:20:51 ipppd[10033] ok, found a valid bundle with linkunit 1
10:20:51 ipppd[10033] bundle: 0
10:20:51 ipppd[10033] local IP address 158.152.xxx.xxx
10:20:51 ipppd[10033] remote IP address 158.152.1.222
10:20:51 ipppd[10033] ioctl(SIOCAIFADDR): No such device
10:20:52 ipppd[10033] Modem hangup
10:20:52 ipppd[10033] Connection terminated.
10:20:52 ipppd[10033] taking down PHASE_DEAD link 1, linkunit: 1
10:20:52 ipppd[10033] closing fd 9 from unit 1
10:20:52 ipppd[10033] link 1 closed , linkunit: 1
10:20:52 ipppd[10033] reinit_unit: 1
10:20:52 ipppd[10033]: Connect[1] /dev/ippp1, fd: 9
10:20:52 kernel: ippp1 remote hangup
10:20:52 kernel: ippp1 Chargesum is 0
Anyone give me some advice abouth what parameters in I4L to change?
Thanks
David